48-60v (three-speed reversing joint) line: 4 flat /3.9 meters

48-60v (three-speed reversing joint) line, 6 flat /3.9 meters

48v-60v-72v(three-speed reverse + converter connector) line 4 flat /3.9 meters

48v-60v-72v(three-speed reverse + converter connector) line 6 flat /3.9 meters

48v-60v-72v(three-speed reverse + converter connector) line 6 flat /5 meters

Purchase Notice :1. Get to know the product before purchasing.
2. All the circuits are custom-made by us at the wire factory. The positions of the interfaces and wires are definitely different. Generally, after purchasing them, you need to modify the wiring yourself. It's impossible to just put them on and use them! It has nothing to do with the brand. Buy based on the style and the size of the current! It is generally possible to install the Prince model. (You can consult the customer service before purchasing to avoid buying the wrong one and not being able to install it.) Each car manufacturer has different interfaces and different cable positions, and the standards may not be consistent. Please pay attention to this point, dear customers. Once you buy it, you definitely need to modify the wiring yourself!
3. Only the installation introduction of the first section of the line is provided on the webpage. We cannot offer a detailed installation diagram for the controller end because each vehicle's controller is different, with distinct functions and interfaces. Therefore, we cannot provide a detailed installation diagram. We can only offer the function diagram of our own large line. Please understand! It's time for everyone to show their skills on the other end of the controller.
4: Correct me. It's not a 6-square-meter wire, but a 6-square-millimeter one, simply called a 6-square-meter wire. You can't add a "meter". The diameter of a 6-square wire is 2.76mm. Calculation of cross-sectional area: Cross-section = square of radius x3.14. To calculate the diameter, just calculate it in reverse.
Dear customer, this is the circuit of the Prince model tricycle. You need to confirm several parameters, including the voltage of the original vehicle bulb, the power and current limiting of the original vehicle controller, and the battery current.
For 12V bulbs, use a circuit with a converter connector. For 56V or 70V bulbs, use high, medium or low-end connectors. For 1000W or 30A and below, a 4-square circuit is recommended. For 1000W or around 35A, a 6-square circuit is suggested. The lines are divided into controller lines (0.5-1.5 square) and main power lines (4 or 6 square). If the original car bulb is 12V or the original car has a converter, purchase the one with high, medium and low grades + converter connector on the purchase webpage. If the original car bulb is 56V or 70V, then use high, medium and low grade lines. The circuit is divided into the main line and the control line. The main line is by default 4 square lines, and the controller line is 0.5 to 1.5 square. It is suitable for the Prince model of electric tricycles. It is insulated with an external anti-electric shock sleeve to prevent leakage, water ingress, dust ingress and other functions, avoiding short circuits. Extended wiring harness, with a total length of 320mm or so, is easy to install and use!