[Material]: ABS [size]: 32*10*7.5cm [weight]: 583g (including packaging) [Watts]: 100W [Packaging]: color box [Package size]: 35*12*10 Instructions for use:

1. Insert the cigarette lighter plug into the cigarette lighter in the car (make sure the vehicle is powered on). 2, there is a power switch on the top of the handle, press it to start, press again to stop 3, should replace different nozzles in different occasions, the length of 4 meters power cord, enough to cover any position inside the car and the trunk. 4. When using, the nozzle is flat on the ground, and the effect is better. 5. The front of the power switch has a filter housing fixed at the beginning, press the detachable front cover to clean the filter. 6, the use of this product must not inhale burning things, such as burning cigarettes. 7. This product is used for both wet and dry. Pay attention to the water level of the storage tank when absorbing water. When the water level is too high, the front cover should be drained in time.

Precautions: 1. When the vacuum cleaner is not working, please check if the plug is in good contact and check if the plug fuse is disconnected. 2. This vacuum cleaner can only use DC power supply 12V, and never use other power supply. 3. The working time of the vacuum cleaner should not be too long, otherwise the motor will be burned out. 4. It is necessary to clean the vacuum cleaner filter in time, otherwise it will affect the vacuum effect.

5. the filter can be cleaned, repeated use.