The light can be cut into sections of 4cm

Need to be re-sealed after cutting. And adjust the length of the light by controlling the controller

Controller button description:

①.Adjust the length of the cut light bar:

a. Press and hold + when the light bar is in the daytime running light state, and the white light will appear half bright, with the midpoint highlighted. (When the light is in the daytime running light state, long press the controller button +, the light brightness will be reduced by half)

b. Short press + to increase the length. Short press - decrease the length.

c. After the adjustment is completed, press and hold the + key to save and exit.

②.Adjust the starting point of the running water turn signal: (Please adjust the luminous length of the cut light bar first)

a. When the light bar is in the daytime running light state, the double flashing light changes to yellow. Press and hold +, and the yellow light will remain on.

b. Short press + to increase the length. Short press - decrease the length.

c. After the adjustment is completed, press and hold the + key to save and exit.

③.Adjust the daytime running light mode

When the light bar is in the daytime running light state, press and hold the - button. Switchable between always-on and dynamic modes.